Querying Hierarchical Data¶
This topic describes how to store and query hierarchical data using:
Recursive CTEs (common table expressions)
- See also:
Storing Hierarchical Data¶
Many types of data are best represented as a hierarchy, such as a tree.
For example, employees are usually organized in a hierarchy, with a company President at the top of the hierarchy.
Another example of a hierarchy is a “parts explosion”. For example, a car contains an engine; an engine contains a fuel pump; and a fuel pump contains a hose.
You can store hierarchical data in:
A hierarchy of tables.
A single table with one (or more) columns representing the hierarchy (e.g. indicating each employee’s direct manager).
Both techniques are described below.
This topic focuses on hierarchical data stored as structured data. Hierarchical data can also be stored as semi-structured data (e.g. JSON data can be stored in ARRAY, OBJECT, or VARIANT data types). For information about semi-structured data, see:
Hierarchical Data Across Multiple Tables¶
Relational databases often store hierarchical data by using different tables. For example, one table might contain “parent” data and another table might contain “child” data. When the entire hierarchy is known in advance, one table can be created for each layer in the hierarchy.
For example, consider a Human Resources database that stores employee information and manager information. If the company is small, then there might be only two levels, for example, one manager and two employees.
CREATE OR REPLACE TABLE managers (title VARCHAR, employee_ID INTEGER);CREATE OR REPLACE TABLE employees (title VARCHAR, employee_ID INTEGER, manager_ID INTEGER);INSERT INTO managers (title, employee_ID) VALUES ('President', 1); INSERT INTO employees (title, employee_ID, manager_ID) VALUES ('Vice President Engineering', 10, 1), ('Vice President HR', 20, 1);
Hierarchical Data in a Single Table¶
In some situations, the number of levels in the hierarchy might change.
For example, a company that started with a two-level hierarchy (President and other employees) might increase the number of levels as the company grows. The company might expand to include a President, Vice Presidents, and regular employees.
If the number of levels is unknown, so that it is not possible to create a hierarchy with a known number of tables, then in some cases the hierarchical data can be stored in one table. For example, a single table can contain all employees, and can include a column that stores each employee’s manager_ID, which points to another employee in that same table. For example:
CREATE OR REPLACE TABLE employees (title VARCHAR, employee_ID INTEGER, manager_ID INTEGER);INSERT INTO employees (title, employee_ID, manager_ID) VALUES ('President', 1, NULL), -- The President has no manager. ('Vice President Engineering', 10, 1), ('Programmer', 100, 10), ('QA Engineer', 101, 10), ('Vice President HR', 20, 1), ('Health Insurance Analyst', 200, 20);
Storing an entire hierarchy of data in one table works best if all levels of the hierarchy store the same data – in our example, employee ID, title, etc. If the data at different levels doesn’t fit the same record structure, then storing all the data in one table might not be practical.
Using Joins to Query Hierarchical Data¶
In a two-level hierarchy (for example, managers and employees), the data can be queried with a two-way join:
SELECT employees.title, employees.employee_ID, managers.employee_ID AS MANAGER_ID, managers.title AS "MANAGER TITLE" FROM employees, managers WHERE employees.manager_ID = managers.employee_ID ORDER BY employees.title; +----------------------------+-------------+------------+---------------+ | TITLE | EMPLOYEE_ID | MANAGER_ID | MANAGER TITLE | |----------------------------+-------------+------------+---------------| | Vice President Engineering | 10 | 1 | President | | Vice President HR | 20 | 1 | President | +----------------------------+-------------+------------+---------------+
In a three-level hierarchy, you can use a 3-way join:
SELECT emps.title, emps.employee_ID, mgrs.employee_ID AS MANAGER_ID, mgrs.title AS "MANAGER TITLE" FROM employees AS emps LEFT OUTER JOIN employees AS mgrs ON emps.manager_ID = mgrs.employee_ID ORDER BY mgrs.employee_ID NULLS FIRST, emps.employee_ID; +----------------------------+-------------+------------+----------------------------+ | TITLE | EMPLOYEE_ID | MANAGER_ID | MANAGER TITLE | |----------------------------+-------------+------------+----------------------------| | President | 1 | NULL | NULL | | Vice President Engineering | 10 | 1 | President | | Vice President HR | 20 | 1 | President | | Programmer | 100 | 10 | Vice President Engineering | | QA Engineer | 101 | 10 | Vice President Engineering | | Health Insurance Analyst | 200 | 20 | Vice President HR | +----------------------------+-------------+------------+----------------------------+
This concept can be extended to as many levels as needed, as long as you know how many levels are needed. But if the number of levels changes, the queries need to change.
Using CONNECT BY or Recursive CTEs to Query Hierarchical Data¶
Snowflake provides two ways to query hierarchical data in which the number of levels is not known in advance:
Recursive CTEs (common table expressions).
A recursive CTE allows you to create a WITH clause that can refer to itself. This lets you iterate through each level of your hierarchy and accumulate results.
CONNECT BY clause allows you to create a type of
JOIN operation that processes the hierarchy one level
at a time, and allows each level to refer to data in the prior level.
For more details, see:
Differences between Self-Join, Recursive CTE, and CONNECT BY¶
CONNECT BY allows only self-joins. Recursive CTEs are more flexible and allow a table to be joined to one
or more other tables.
CONNECT BY clause has most of the power of a recursive CTE. However,
a recursive CTE can do some things that a
CONNECT BY cannot.
For example, if you look at the recursive CTE examples, you see that one
of the queries indents the output and also sorts the output so that each
“child” appears underneath the corresponding “parent”. The sorting is done
by creating a sort key that contains the chain of IDs from the top all the
way down to the current level. In the manager/employee example, the chain
contains the President’s ID, followed by the Vice President’s ID, etc.
This sort key groups rows in a way that looks similar to a sideways tree.
CONNECT BY syntax doesn’t support this because the
“START WITH” clause does not allow the code to specify additional columns
(beyond those in the table itself), such as the sort_key. Contrast the two
code snippets below:
SELECT indent(LEVEL) || employee_ID, manager_ID, title FROM employees -- This sub-clause specifies the record at the top of the hierarchy, -- but does not allow additional derived fields, such as the sort key. START WITH TITLE = 'President' CONNECT BY ... WITH RECURSIVE current_layer (employee_ID, manager_ID, sort_key) AS ( -- This allows us to add columns, such as sort_key, that are not part -- of the employees table. SELECT employee_ID, manager_ID, employee_ID AS sort_key ... )
You can, however, use the
SYS_CONNECT_BY_PATH function to achieve a similar effect with the
CONNECT BY clause.
CONNECT BY clause version is limited because the START WITH
clause cannot add columns to those already in the row (even derived columns
based on values already in the row), it also has some advantages:
You have access to all columns of each row without specifying those columns in a column list. In a recursive CTE, the recursive clause does not have access to columns that are not explicitly specified in the CTE.
In a recursive CTE, you must specify the columns in the CTE, and the projection lists of the selects in the anchor clause and the recursive clause, must both match the columns in the CTE. If the order of the columns in the various projection clauses does not match, you can cause problems such as infinite loops.
CONNECT BYsyntax supports convenient pseudo-columns such as
A minor difference between
CONNECT BY and recursive CTE is that in
you use the keyword
PRIOR to indicate which column values should be taken
from the previous iteration, whereas in a recursive CTE you use the table
name and the CTE name to indicate which values are taken from the current
iteration and which are taken from the previous iteration. (In a recursive CTE,
you can also distinguish between current and previous iterations by using
different column names in the CTE column list than in the source table or table
This topic described hierarchies and how parent-child relationships
can be used by recursive CTEs (common table expressions) and
clauses. In all of this topic’s examples, as well as all the examples in the
CONNECT BY documentation and the recursive CTE documentation, the hierarchies are
contiguous. None of the examples has a parent and a grandchild without having a corresponding child between them.
For example, if you do a “parts explosion” of a car, you’re not going to have a component for the car, and a component for the tire, without having a component for the wheel that contains the tire (and that is contained by the car).
However, there can be cases where data is incomplete. For example, in an employee/manager hierarchy, suppose that the Vice President of Engineering retires and the company doesn’t hire a replacement immediately. If the VP’s employee record is deleted, then employees below that VP are “cut off” from the rest of the hierarchy, so the employees table no longer contains a single contiguous hierarchy.
If you use recursive CTEs or
CONNECT BY to process data, you need to think about whether the data in your table
represents a single, contiguous tree. You can use recursive CTEs and
CONNECT BY on
a single table that contains multiple trees, but you can only
query one tree at a time, and that tree must be contiguous.