Configuring SnowSQL¶
This topic describes how to configure SnowSQL using connection parameters, configuration options, and variables.
SnowSQL config
File¶
SnowSQL supports multiple configuration files that allow organizations to define base values for connection parameters,
default settings, and variables while allowing individual users to customize their personal settings in their
own <HOME_DIR>/.snowsql/config
files. When SnowSQL starts, it loads configuration parameter values from the following
configuration file locations in order, overriding values from files loaded previously:
/etc/snowsql.cnf
/etc/snowflake/snowsql.cnf
/usr/local/etc/snowsql.cnf
<HOME_DIR>/.snowsql.cnf
(supported only for backward compatibility)<HOME_DIR>/.snowsql/config
For example, if the /etc/snowsql.cnf
configuration file sets the log_level
parameter to info
, you can
override this by setting the parameter to debug
in your file <HOME_DIR>/.snowsql/config
file.
You should create these configuration files using UTF-8 encoding.
Modify the configuration file as follows:
Open the SnowSQL configuration file (named
config
) in a text editor. The default location of the file is:- Linux/macOS
~/.snowsql/
- Windows
%USERPROFILE%\.snowsql\
Note
You can change the default location by specifying the
--config path
command-line flag when starting SnowSQL.Modify settings in the following sections:
Attention
The password is stored in plain text in the
config
file. You must explicitly secure the file to restrict access. For example, in Linux or macOS, you can set the read permissions to you alone by runningchmod
:$ chmod 700 ~/.snowsql/config
Note
If a value contains special characters (other than single or double quotes), you must enclose it in either single quotes or double quotes, e.g.:
password = "my$^pwd"
If a value contains quote characters in addition to other special characters, escape these quotes using the backslash (
\
) character, e.g.:password = "my$^\"\'pwd"
Note that escaping quote characters is optional in unenclosed values (i.e. values that do not contain other special characters).
Multi-line values must be enclosed in three single or double quotes (
'''
or"""
), e.g.:prompt_format='''[#FFFF00][user]@[account] [#00FF00]> '''
Connection Parameters Section¶
In the [connections]
section of the config
file, optionally set the default connection parameters for SnowSQL,
e.g. account identifier, user login credentials, and the default database and warehouse.
You can also define named connections to make multiple simultaneous connections to Snowflake or store different sets of connection configurations.
For more information, see Connecting Through SnowSQL.
Configuration Options Section¶
Configure the behavior of SnowSQL by adding settings in the [options]
section of the config
file:
[options] <option_name> = <option_value>
Where:
<option_name>
is the name of the option (case-insensitive). If an invalid name is specified, SnowSQL displays an error.<option_value>
specifies a supported value (case-insensitive) for the option, as described below.
+----------------------------+---------------------+------------------------------------------------------------------------------------+
| Name | Value | Help |
+----------------------------+---------------------+------------------------------------------------------------------------------------+
| auto_completion | True | Displays auto-completion suggestions for commands and Snowflake objects. |
| client_session_keep_alive | False | Keeps the session active indefinitely, even if there is no activity from the user. |
| echo | False | Outputs the SQL command to the terminal when it is executed. |
| editor | vim | Changes the editor to use for the !edit command. |
| empty_for_null_in_tsv | False | Outputs an empty string for NULL values in TSV format. |
| environment_variables | ['PATH'] | Specifies the environment variables that can be referenced as SnowSQL variables. |
| | | The variable names should be comma separated. |
| execution_only | False | Executes queries only. |
| exit_on_error | False | Quits when SnowSQL encounters an error. |
| fix_parameter_precedence | True | Controls the precedence of the environment variable and the config file entries |
| | | for password, proxy password, and private key phrase. |
| force_put_overwrite | False | Force PUT command to stage data files without checking whether already exists. |
| friendly | True | Shows the splash text and goodbye messages. |
| header | True | Outputs the header in query results. |
| insecure_mode | False | Turns off OCSP certificate checks. |
| key_bindings | emacs | Changes keybindings for navigating the prompt to emacs or vi. |
| log_bootstrap_file | ~/.snowsql/log_... | SnowSQL bootstrap log file location. |
| log_file | ~/.snowsql/log | SnowSQL main log file location. |
| log_level | CRITICAL | Changes the log level (critical, debug, info, error, warning). |
| login_timeout | 120 | Login timeout in seconds. |
| noup | False | Turns off auto upgrading SnowSQL. |
| output_file | None | Writes output to the specified file in addition to the terminal. |
| output_format | psql | Sets the output format for query results. |
| paging | False | Enables paging to pause output per screen height. |
| progress_bar | True | Shows progress bar while transferring data. |
| prompt_format | [user]#[warehou...] | Sets the prompt format. Experimental feature, currently not documented. |
| sfqid | False | Turns on/off Snowflake query id in the summary. |
| sfqid_in_error | False | Turns on/off Snowflake query id in the error message. |
| quiet | False | Hides all output. |
| remove_comments | False | Removes comments before sending query to Snowflake. |
| remove_trailing_semicolons | True | Removes trailing semicolons from SQL text before sending queries to Snowflake. |
| results | True | If set to off, queries will be sent asynchronously, but no results will be fetched.|
| | | Use !queries to check the status. |
| rowset_size | 1000 | Sets the size of rowsets to fetch from the server. |
| | | Set the option low for smooth output, high for fast output. |
| stop_on_error | False | Stops all queries yet to run when SnowSQL encounters an error. |
| syntax_style | default | Sets the colors for the text of SnowSQL. |
| timing | True | Turns on/off timing for each query. |
| timing_in_output_file | False | Includes timing in the output file. |
| variable_substitution | False | Substitutes variables (starting with '&') with values. |
| version | 1.1.70 | Returns SnowSQL version. |
| wrap | True | Truncates lines at the width of the terminal screen. |
+----------------------------+---------------------+------------------------------------------------------------------------------------+
See SnowSQL Configuration Options Reference (in this topic) for descriptions of all valid options.
Note
In addition to setting the configuration options in the config
file, you can set the options using either of the following methods:
While connecting to Snowflake, you can use the
-o
or--option
connection parameter to set these options. For more information, see Connection Parameters Reference.After connecting to Snowflake, you can use the
!set
command to set these options for the session. For more information, see Commands Reference.
Variables Section¶
In the [variables]
section of the config
file, you can store values as variables for reuse. This feature enables you to use user-defined and database values in queries.
For more information, see Using Variables.
SnowSQL Configuration Options Reference¶
Options modify the default SnowSQL behavior. You can set these options using any of the following methods:
In the configuration file (as described in this topic).
Using the
-o
or--option
parameter when connecting to Snowflake.Using the
!set
command once connected to Snowflake.
Note
The option names and values are case-insensitive.
auto_completion
¶
- Type
Boolean
- Description
Enables context-sensitive auto-completion. If enabled, functions, table names, and variables stored in SnowSQL are auto-completed in interactive mode.
- Default
auto_completion=True
client_session_keep_alive
¶
- Type
Boolean
- Description
Indicates whether to force a user to log in again after a period of inactivity in a JDBC or ODBC session. When set to
True
, Snowflake keeps the session active indefinitely, even if there is no activity from the user. When set toFalse
, the user must log in again after four hours of inactivity.- Default
client_session_keep_alive=False
echo
¶
- Type
Boolean
- Description
Echoes local input. When set to
True
, echoes to bothstdout
and the output file.- Default
echo=False
editor
¶
- Type
String (constant)
- Description
Specifies the editor to invoke when the
!edit
command is issued in SnowSQL. Supported values:
emacs
vi
vim
- Default
editor=vim
empty_for_null_in_tsv
¶
- Type
Boolean
- Description
If enabled, when
output_format
is set toTSV
, SnowSQL outputs an empty string for each NULL value.- Example
empty_for_null_in_tsv=True
environment_variables
¶
- Type
List
- Description
Specifies the environment variables to be set in the SnowSQL variables.
- Example
environment_variables=PATH,USER,AWS_ACCESS_KEY_ID,AWS_SECRET_ACCESS_KEY
execution_only
¶
- Type
Boolean
- Description
If enabled, SnowSQL executes queries without fetching data. This option is useful when you only want to measure execution times. Note that returned values include any network latency and are not pure server-side execution times.
- Example
execution_only=True
exit_on_error
¶
- Type
Boolean
- Description
If enabled, SnowSQL exits when an error occurs. This behavior is useful to stop running queries when an error is encountered.
- Example
exit_on_error=True
fix_parameter_precedence
¶
- Type
Boolean
- Description
Controls the precedence among the possible sources of the password, proxy password, and private key phrase parameters.
If the value is True, the precedence (from highest to lowest) is:
The environment variable or the SnowSQL command-line parameter.
The connection-specific connection parameters, which are the parameters in the config file’s named connection section, e.g. the section
[connections.myconnection]
.The default connection parameters, which are the parameters in the
[connections]
section of the config file.If the value is False, the precedence (from highest to lowest) is:
The connection-specific connection parameters, which are the parameters in the config file’s named connection section, e.g. the section
[connections.myconnection]
.The environment variable or the SnowSQL command-line parameter.
The default connection parameters, which are the parameters in the
[connections]
section of the config file.- Default
True
force_put_overwrite
¶
- Type
Boolean
- Description
If enabled, SnowSQL forces the PUT command to upload (i.e. stage) data files from a local directory/folder on a client machine to the specified internal (i.e. Snowflake) stage without checking whether the files already exist in the stage. If the files are already present in the destination stage, the PUT command overwrites the existing files.
- Default
force_put_overwrite=False
friendly
¶
- Type
Boolean
- Description
If disabled, SnowSQL suppresses the startup and exit messages.
- Default
friendly=True
header
¶
- Type
Boolean
- Description
Displays the header in the results table rendered by SnowSQL. Disabling this option is useful when you want to retrieve data-only in the results.
Can be used with
output_format
andtiming
to produce data-only output.- Default
header=True
insecure_mode
¶
- Type
Boolean
- Description
Skips the certificate revocation checks using the Online Certificate Status Protocol (OCSP). This option could be used in an emergency situation in which no OCSP service is accessible. Snowflake strongly recommends that you do not enable this option unless directed by Snowflake Support.
- Default
insecure_mode=False
key_bindings
¶
- Type
String (constant)
- Description
Key bindings to use. Possible values:
emacs
: [CTRL]-a is home, [CTRL]-e is end. All Emacs key bindings for the REPL environment are available.
vi
: You can use all modal editing features offered by vi in the REPL environment.- Note
The value cannot be changed by
!set
command during the SnowSQL session. Instead, set the value in the configuration file or on the command line when connecting to Snowflake.- Default
key_bindings=vi
log_bootstrap_file
¶
- Type
String (path)
- Description
Bootstrap log file location. If not specified,
log_file
is used as the base name followed by_bootstrap
. For example, by default, the log file name islog_bootstrap
.- Default
log_bootstrap_file=~/.snowsql/bootlog
log_file
¶
- Type
String (path)
- Description
log_file location.
Note
You must have permissions to write to the log file’s parent directory or to modify the location of the log file.
- Default
log_file=~/.snowsql/log
log_level
¶
- Type
String (constant)
- Description
Default log level. Possible values:
CRITICAL
,ERROR
,WARNING
,INFO
,DEBUG
.
login_timeout
¶
- Type
Number
- Description
Login timeout in seconds.
- Default
login_timeout=120
noup
¶
- Type
Boolean
- Description
Prevents SnowSQL from downloading and installing a new version if
True
. By default, SnowSQL auto-upgrades to the latest version if no version is specified.- Default
noup=False
output_file
¶
- Type
String (path and file name)
- Description
Writes output to the specified file in addition to the terminal output.
- Default
None
output_format
¶
- Type
String (constant)
- Description
Specifies the format of the results displayed in the terminal. Possible values:
csv
expanded
fancy_grid
grid
html
json
latex
latex_booktabs
mediawiki
orgtbl
pipe
plain
psql
rst
simple
tsv
Recommended values for tabular results:
psql
,grid
, orfancy_grid
Recommended values for data-only results (used in combination with
header
,timing
, andfriendly
set toFalse
):plain
,csv
, ortsv
- Default
output_format=psql
paging
¶
- Type
Boolean
- Description
When enabled, pauses output per screen height. This feature is useful for browsing large result sets. To scroll down, press the [ENTER]/[RETURN] key.
- Default
paging=False
progress_bar
¶
- Type
Boolean
- Description
Shows progress bar while transferring data.
- Default
progress_bar=True
prompt_format
¶
- Type
string
- Description
Changes the SnowSQL prompt format.
The SnowSQL prompt dynamically displays the current user, warehouse, database, and schema by default. Dynamic tokens are written as [<token>], e.g. [user] or [warehouse]. You can change the Snowflake object order, delimiter, and color. Change the object color by defining a pygments token in brackets.
For example, change the object order to user, database and schema, then warehouse. Change the delimiter to a period. Change the [user] object name to red, the [database] and [schema] names to green, and the [warehouse] name to blue:
prompt_format="[#FF0000][user]@[#00FF00][database][schema][#0000FF][warehouse]"Put quotes around the value to prevent “#” characters from being interpreted as the start of a comment.
- Default
None
quiet
¶
- Type
Boolean
- Description
Removes all output data from the terminal, but continues to display error messages and diagnostic data.
- Default
quiet=True
remove_comments
¶
- Type
Boolean
- Description
Removes comments from the output.
- Default
remove_comments=False
remove_trailing_semicolons
¶
- Type
Boolean
- Description
Removes trailing semicolons from SQL text before sending queries to Snowflake. Note that removing the semicolons can prevent Snowflake from using cached results from different clients when the USE_CACHED_RESULT session parameter is enabled.
- Default
remove_trailing_semicolons=True
results
¶
- Type
Boolean
- Description
Returns the query results. If
False
,the query is executed asynchronously, no result including any error messages is returned.- Default
results=True
rowset_size
¶
- Type
Number
- Description
Number of rows to fetch at once in interactive mode. Results are then fetched for output one rowset at a time.
- Default
rowset_size=1000
sfqid
¶
- Type
Boolean
- Description
Includes the Snowflake query ID in the result summary.
Note: You must also set
timing_in_output_file=True
to addsqfid
to the spool file.- Default
sfqid=False
sfqid_in_error
¶
- Type
Boolean
- Description
Includes the Snowflake query ID in error messages.
- Default
sfqid_in_error=False
stop_on_error
¶
- Type
Boolean
- Description
When an error is encountered, stops query execution, but does not exit.
- Default
stop_on_error=False
syntax_style
¶
- Type
String (constant)
- Description
Sets the text colors for SnowSQL. Currently, the only supported value is
default
.- Default
syntax_style=default
timing
¶
- Type
Boolean
- Description
Specifies whether to display the number of rows produced and elapsed time for SQL statements that have executed. This information is displayed as a line of text under the results table rendered by SnowSQL. If set to
False
, the line of text under the results table is not displayed.Can be used in conjunction with
header
andoutput_format
to produce data-only output.- Default
timing=True
timing_in_output_file
¶
- Type
Boolean
- Description
Specifies whether to include the execution time details in the output file, if the
output_file
option is configured. Requires also setting thetiming
option toTrue
.If set to
False
, the line of text under the results table is not included in the output file.- Default
timing_in_output_file=False
variable_substitution
¶
- Type
Boolean
- Description
Substitutes variables with the values. See Using Variables.
- Default
variable_substitution=False
wrap
¶
- Type
Boolean
- Description
Wraps the output by the terminal width. If
False
, the outputs are truncated.- Default
wrap=True